Power Up And Connect - Brookstone Rover User Manual

PoWer uP and connecT

1 . Slide the Power switch on the bottom of the Rover to on . The ORANGE
POWER LED will illuminate . Wait approximately 30 seconds and the BLUE
CONNECTION LED will start to blink slowly .
led StAte cHARt
2 . On your iPod touch
The SSID address of your Rover (17 digits starting with AC13_) will appear as
an available connection .
Note: each Rover has a unique SSId address (printed on the underside of the
unit). If there are multiple Rover's being used, the individual SSId addresses will
appear as Wi-fi connections on your device. Select your Rover's SSId address.
3 . Select the Rover to confirm the connection . Ensure there is a check mark to the
left of the SSID address and the Wi-Fi connection logo appears at the top of
your device's screen .
4 . Exit out of Settings and open the Rover App .
5 . The BLUE CONNECTION LED will now revert from blinking to solid .
6 . When your device's screen shows the view from the Rover's live-stream video
camera—you are ready to start exploring .
11
s
d
LE tate
Orange Solid
Blue Blinking
Blue Solid
, iPhone or iPad device, go to Settings and turn Wi-Fi on .
®
Represents
Power on
Searching for and acquiring Wi-Fi connection
Rover app is open and Wi-Fi is connected