Listening To Audio - Blueant ENDURE User Manual

phone voice dialing, it will happen on the "primary phone": the one
that connected to the headset fi rst.
9

Listening to Audio

The Endure supports A2DP audio streaming: if your phone or
Bluetooth device supports the A2DP profi le then simply start playing
music or any other audio (including directions from a GPS application
on the phone) and it will automatically transfer to the headset.
The audio will mute automatically if you make or receive a phone call,
and resume when the call ends.
Note: The Endure only supports A2DP bluetooth audio streaming
from one phone at a time.
10 Reset your Endure
If you are having problems with the Endure, you can reset it and start
again:
1. Disconnect the Endure from your phone by deleting the pairing
from your phone's Bluetooth menu.
2. Turn your phone off and back on again to clear its memory.
3. With the Endure switched on, but not connected to any phones,
hold down all three buttons
for about 3 seconds.
(Vol +, Vol -, and the Command button)