Frigidaire 309000848 Owner's Manual page 8

Air Conditioner Features
(continued)
STEP 5 — TO OPERATE
ON FAN ONLY:
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air.(remember to
open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan
speed you prefer.
During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.
STEP 6 — TO USE THE
ENERGY SAVER FEATURE:
Note: In this mode, when the compressor shuts off, the fan will continue to run for another 3 minutes, then shut off until
cooling is needed, as sensed by the room temperature control. During this time, it may come on for 3 minutes to sense whether
cooling is needed, then it will go off for 10 minutes. It will continue doing this to sample the room air for as long as necessary.
STEP 7 — TIMER-DELAY
STOP FEATURE
72
Note: The unit must be running to make this setting.
Proceed as in step 9 to change the desired number of hours, before the control will time out and turn off.
DO THIS:
PRESS ON
(if not running)
PRESS
FAN ONLY
CHOOSE ONE
DO THIS:
PRESS
ENERGY SAVER
DO THIS:
PRESS
(if unit is not
running)
PRESS
8
YOU WILL SEE:
72
YOU WILL SEE:
72
YOU WILL SEE:
0.5