Table of Contents
Advertisement
Air Conditioner Features
SLEEP FEATURE:
Temp/Timer
Auto Temp
Hi
Med
Lo
Heat
Cool
Fan
Speed
Energy Saver
Fan Only
Temp/Timer
Mode
Timer
The Sleep Mode can be selected with a Heating or Cooling Mode. Note: In this "MODE" the selected cooling temperature
will increase by 2 degrees F, 30 minutes after the mode is selected. The temperature will then increase by another 2
degrees F, after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the
originally selected temperature. If this Mode is selected with Heat, the set temperature will Decrease at the same time
pattern. This ends the "Sleep" MODE and the unit will continue to operate as originally programmed. The "Sleep" MODE
program can be cancelled at any time during operation by pressing "Sleep" MODE button.
CHECK FILTER FEATURE:
Temp/Timer
Auto Temp
Hi
Med
Lo
Heat
Cool
Fan
Speed
Energy Saver
Fan Only
Temp/Timer
Mode
Timer
Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation and cooling. The
LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press the "Clean Filter" button and
the light will go off.
REMOTE SENSING FEATURE (on some models)
Temp/Timer
Temp/Timer
Cool
Energy
Fan
Saver
Only
Auto
Timer
Sleep
Temp
Star t
Stop
Remote
Sensing
Note: This feature can be activated from the remote control
To activate the remote sensing feature, point the remote control towards the unit and press the remote sensing start button.
The LIGHT on the unit control will pulse to indicate it received the signal. The LIGHT on the remote control will pulse each
time it sends a signal. It will continue to send this signal until the feature is deactivated by pressing the remote sensing stop
button. If the unit does not receive the remote sensing signal during any 3 minute interval, the unit will keep to indicate the
remote sensing mode has ended. The display on the remote control indicates the temperature at the remote
display indicates the set temperature.
(continued)
Check
Sleep
Filter
Remote
Sensing
Check
Sleep
Filter
PRESS TO RESET
Remote
Sensing
LIGHT Pulsing On
& Off Intermittently
DO THIS:
PRESS SENSING
START BUTTON
DO THIS:
PRESS
SLEEP PAD
DO THIS:
Temp/Timer
Auto Temp
Hi
Med
Lo
Heat
Cool
Fan
Speed
Energy Saver
Fan Only
Temp/Timer
Mode
Timer
Note: unit display show
"set" temperature
ONLY
.
8
YOU WILL SEE:
Auto Temp
Hi
Med
Lo
Heat
Cool
Fan
Speed
Energy Saver
Fan Only
Mode
YOU WILL SEE:
Auto Temp
Hi
Med
Lo
Heat
Cool
Fan
Speed
Energy Saver
Fan Only
Mode
YOU WILL SEE:
Check
Sleep
Filter
Cool
Sleep
Remote
Sensing
Star t
Note: remote display is
actual temperature at
remote control only
LIGHT ON
Temp/Timer
Check
Sleep
Filter
Temp/Timer
Remote
Sensing
Timer
LIGHT ON
Temp/Timer
Check
Sleep
Filter
Temp/Timer
Remote
Sensing
Timer
Temp/Timer
Temp/Timer
Energy
Fan
Saver
Only
Auto
Timer
Temp
Stop
Remote
Sensing
ONLY
. The unit
Hide quick links:
Advertisement
Table of Contents
