Baxi MULTIFIT Flue Systems Fittings Manual page 13

Outlet must be at
45°
least 45° from
wall face
45°
Air Inlet at Bottom
200mm Min.
© Baxi Heating UK Ltd 2011
300mm Min.
The inlet of the PDK
MUST be at least
300mm above ground
or balcony level or any
projection or ledge. A
guard must be fitted
where the inlet is below
2 metres.
FITTING PLUME DISPLACEMENT KIT
The outlet of the PDK
MUST be at least 2
metres above ground or
balcony level. If
necessary additional
60Ø extensions should
be used to achieve this.
Terminal Guard
Part No 720644601
500mm Min.
page 13
2 metres Min.