FOLSOM PresentationPRO PS-2001 Installation And Operator's Manual page 11

Introduction
About the PresentationPRO
PresentationPRO is a compact, reliable system that simplifies the task of supporting professional-quality video
presentations. The unit combines a seven input A/V router, a high performance video scaler, an audio processor, and
a full-featured control panel in a single integrated package. Seven universal A/V inputs accept composite video, s-
video, component, computer and video sources with HDTV timing, as well as stereo audio signals. The unit also
accepts two non-switched audio sources (LINE and MIC) that can be mixed with the audio from the selected input
channel. The input video is converted directly to the native resolution or "sweet spot" of the projection device to
optimize image quality. PresentationPRO supports seamless transitions including cut, fade, dissolve, and wipe effects
when sources are switched. The operator can also capture and store a high-resolution image (typically a logo) for
quick recall.
PresentationPRO is designed to support professional quality presentations for a wide variety of applications including
corporate boardrooms/training facilities, courtrooms, churches, and educational institutions. The user interface has
been designed to be simple to use. To select an A/V source, the operator simply presses the desired Source Select
key on the front panel. PresentationPRO automatically locks to the new source and scales the input video to match
the projector's native resolution. Image size, position, contrast, brightness, color balance, and audio level are
automatically restored from a setup file. The selected source is seamlessly transitioned to the output with the user-
selected transition effect.
Attention to the Installation and Operation Sections of this manual is important to ensure trouble-free operation.
Should you have any questions regarding the operation of this unit, please consult the factory.
Features
The PresentationPRO provides the following features:
·
Seven universal input channels accept composite (NTSC/PAL), s-video, component, and computer video
sources (640x480 VGA to 1600x1200 UXGA). Videos with progressive 480p and 720p HDTV timing are
alsog supported
·
True auto-sync operation; the unit automatically locks to the selected source
·
Seven stereo audio inputs (one for each input channel) accept Consumer or Professional audio levels
·
High-performance A/V router and scaler provide superior image quality
·
Input video is scaled to match the native resolution or "sweet spot" of the projector
·
User-programmable output formats: VGA (640x480), SVGA (800x600), XGA (1024x768), SXGA
(1280x1024)
·
Seamless transitions; cut, fade, dissolve, and wipe effects with programmable duration
·
Two non-switched audio inputs (MIC and LINE) can be mixed with the audio from the selected input channel
·
Intuitive user interface simplifies set-up
·
RS-232 serial port supports remote control operation
·
Motion adaptive de-interlacing
·
Logo image capture and recall feature
·
Pre-programmed test patterns for projector calibration
·
Two independently buffered video outputs
·
One professional quality stereo audio output
Manual # 26-0006901-00 / Revision E PresentationPRO – A/V Seamless Switcher
2