Summary of Contents for Bacharach Portable Monitor Bladder Bag Replacement
Page 1
Portable Monitor Bladder Bag Replacement Instruction 3015-5545 Rev. 1 – December 2011 Scope These instructions describe how to replace the bladder bag in the Portable Monitor shown in Figure 1. It is assumed that the user is familiar with the operation of the appropriate monitor. If necessary, refer to the instruction manual for detailed operation and maintenance information.
Page 2
Portable Monitor Bladder Bag Replacement Disassembling the Chassis Gain access to the bladder bag by disassembling the monitor’s metal chassis as follows: 1. Unplug battery pack from monitor. 2. Remove monitor and its battery pack from the soft carrying case.
Page 3
Portable Monitor Bladder Bag Replacement Replacing the Bladder Bag 1. Remove the tubing connection that connects the T-fitting to the bladder bag. Remove tubing from both connection points and lay aside. 2. Remove the old bladder bag by separating the Velcro pieces on the bladder bag from those on the metal chassis.
Page 4
Portable Monitor Bladder Bag Replacement 5. To place bladder bag in position, fold bag in half lengthwise and insert the folded edge into the corner of the rear panel. Hold seam in corner and open the fold to contact the adhesive side of the two Velcro pieces. Press bag firmly into place.