Camera Tampering; Motion Detection; Setting Up An Action Rule - Axis P3367–VE User Manual

Fixed dome network camera

Hide thumbs Also See for P3367–VE:

Table of Contents

AXIS P3367–VE Fixed Dome Network Camera

Detectors

Camera Tampering

Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely

defocused. To send an alarm, for example an email, an action rule must be set up.

To conﬁgure tampering:

1. Go to Detectors > Camera Tampering.

2. Set the Minimum duration, that is, the time that must elapse before an alarm is generated. This can help prevent false

alarms for known conditions that affect the image.

3. Select Alarm for dark images if an alarm should be generated if lights are dimmed or turned off, or if the lens is sprayed,

covered, or rendered severely out of focus.

4. Click Save.

To conﬁgure the product to send an alarm when tampering occurs:

1. Go to Events > Action Rules.

2. Click Add to set up a new action rule.

3. Enter a Name for the action rule.

4. Under Condition, select Detectors from the Trigger list.

5. Select Tampering from the list of detectors.

6. Optionally, select a schedule and set additional conditions.

7. Select the action. To send an email, select Send Notiﬁcation and select a Recipient from the list of deﬁned recipients.

For more information on actions rules, see Events, on page 31.

Motion detection is used to generate an alarm whenever movement occurs (or stops) in the view. Up to 10 Include and Exclude

windows can be conﬁgured:

Include windows — target speciﬁc areas within the whole video image

•

Exclude windows — deﬁne areas within an Include window that should be ignored (areas outside Include windows

•

are automatically ignored)

Once conﬁgured, motion detection windows appear in the list of Detectors in Action rule setup. See Setting up an Action Rule, on

page 31.

Note

Using the motion detection feature may decrease the product's overall performance.

Table of Contents