Operating mode 'Master/Slave'
Operating mode 'Standby'
Press [MENU] repeatedly until the display shows 'Slave Mode' . Press [ENTER]. The lower line of
the display starts to flash. Using [UP] and [DOWN] you can now select between 'Slave 1' (the
movements of master and slave device are identical) and 'Slave 2' (the movements of master
and slave device are different).
When the display shows the desired value, press [ENTER]. After that, keep [MENU] pressed for
several seconds to acknowledge the value. To get back to the main menu without changes,
either press [MENU] briefly or wait for eight seconds.
Use this function to turn off the light temporarily without the need to change the other set‐
tings.
Press [MENU] repeatedly until the display shows 'StandBy Mode' . Press [ENTER]. The lower line
of the display starts to flash. Using [UP] and [DOWN] you can turn the Standby mode on ( 'Yes' )
or off ( 'No' ).
When the display shows the desired value, press [ENTER]. After that, keep [MENU] pressed for
several seconds to acknowledge the value. To get back to the main menu without changes,
either press [MENU] briefly or wait for eight seconds.
MH-575 S MKII Pro-Spot
Operation
33