Advertisement
170
Raised Panel "V" Joint Bit
Application: Producing strong, attractive glue joint raised panels
• Mating surfaces are at an angle, not vertical, so the dark lines like those created by
standard finger joint bits arenot visible.
• Bit does not have to be centered in the wood.
• Simply raise or lower the bit 3/32" to route the mating edge.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers.
Item
Number
A
99-038
5/32"
D
Opposing Grain Direction
All Profile Drawings 1:1 Scale
Overall
Carbide
Minor
Dia.(D)
Height(h)
Height
1-3/8"
1-37/64"
3/16"
Example of "V" Jointed Panel
Angle
Shank
(d)
Dia.(A)
80°
1/2"
# 99-038
Red Item Numbers Indicate 1/2" Shank
Overall
Length(H)
3-1/16"
Advertisement
