Audioplex SPKCNV Installation Manual

SPEAKER LEVEL TO LINE LEVEL CONVERTER
Connectors:
Power Handling:
Frequency Response:
Total Harmonic Distortion:
Input Impedance:
Output Impedance:
Size:
Weight:
The SPKCNV is designed to convert speaker level signals to line level signals in a simple, easy to use
package. Prepare the speaker level wires by stripping about 1/4" of insulation from each wire end. Twist the
strands tightly together so that none stick out to cause possible short circuits. Wire the unit following the
diagram below. Be sure to observe polarity!
SOURCE AMPLIFIER
Your AUDIOPLEX TECHNOLOGY SPKCNV is covered by a lifetime warranty against any defects in
workmanship and materials. Any defects will be remedied without charge for labor and parts.
Damage incurred by shipping or accident is not considered to be a defect, and not covered by this
warranty. AUDIOPLEX TECHNOLOGY is not responsible for defective operation caused by abuse or by
modification or service by any unauthorized person or agency.
The unit must be properly installed and operated according to instructions for the warranty to apply.
Any necessary servicing must be done by AUDIOPLEX TECHNOLOGY. The product must be returned
expenses prepaid, with written authorization from the company. The product must be shipped with the proof
of purchase and in the original carton and packing material to avoid damage.
This warranty gives you specific legal rights. You may have other rights which vary from state to state.
404 GWH
1-800-257-2077
INSTALLATION MANUAL
TECHNOLOGY
SPKCNV

SPECIFICATIONS

Input: Spring Clips / Output: RCA jacks
150 Watts RMS
20Hz-20KHz +/-0.3dB
Less than 0.05%
100K
10K
3.5"W x 1.25"H x 1.125"D
0.5 lbs
L+ L- R- R+
TO LINE LEVEL INPUT
WARRANTY
AUDIOPLEX TECHNOLOGY
P.O. BOX 440
603-544-8601
www.audioplex.com
WIRING DIAGRAM
TM
MELVIN VILLAGE, N.H. 03850
FAX: 603-544-8901