Advertisement
Troubleshooting
7
If you start having problems with distorted sound or loss of performance after installing your box in your
empty enclosure, you can follow the instructions below to try and locate what is causing the problem.
1)
If you have any distorted sound, loss of performance, or rattling from your subs after you install
your box, check the connections running from your amplifier or other processor to the box. You
will also want to check the connections inside the box to make sure no wires have become un
hooked or are loose.
2)
If the above does not solve the problem, check your enclosure thoroughly to see if there are any
leaks, cracks, or broken pieces. Make sure the plexiglass is securelt fastened. Any loss of structural
integrity of your enclosure can cause significant performance loss and distortion.
3)
The next step you can take is to remove the subs and look for any burned wire leads or separated
components. Sometimes when you play subs too hard for too long, they will start to heat up.
4)
If none of the above steps solve the problem, you will want to start looking at the other components
in the vehicle. Start by checking all connections to and from the box, amplifier, source unit, or any
other processors you may be using. You will need to reference to that particular manufacturer for
any setting configurations or troubleshooting.
Advertisement
