Troubleshooting - AudioBahn AWES12P Operating Instructions Manual

Troubleshooting

If you start having problems with distorted sound or loss
performance after installing your subs, you can follow the
instructions below to try and locate what is causing the
problem.
1) If you have any distorted sound, loss of performance,
2) If the above does not solve the problem, check your
3) The next step you can take is to remove the subs and
4) If none of the above steps solve the problem, you will
or rattling from your subs, check the connections
running from your amplifier or other processor to the
box. You will also want to check the connections inside
the box to make sure no wires have become unhooked
or are loose.
enclosure thoroughly to see if there are any leaks,
cracks, or broken pieces. Any loss of structural integrity
of your enclosure can cause significant performance
loss and distortion.
look for any burned wire leads or separated
components. You can normally smell something
burning when a sub blows or is going bad. Sometimes
when you play subs to hard for too long, they will start
to heat up.
want to start looking at the other components in the
vehicle. Start by checking all connections to and from
the box, amplifier, source unit, or any other processors
you may be using. You will need to reference to that
particular manufacturer for any setting configurations or
troubleshooting.
13