Planet FNSW-2402 User Manual page 10

Figure 2-4 Attaching the brackets to the Switch (example on FNSW-1602)
Caution:
You must use the screws supplied with the mounting brackets. Damage caused
to the parts by using incorrect screws would invalidate your warranty.
Step3: Secure the brackets tightly.
Step4: Follow the same steps to attach the second bracket to the opposite side.
Step5: After the brackets are attached to the switch, use suitable screws to se-
curely attach the brackets to the rack, as shown in Figure 2-5.
Figure 2-5 Mounting the Switch in a Rack (example on FNSW-1602)
Step 6: Proceed with the steps 4 and steps 5 of section 2.2.1 Desktop Installation
to connect the network cabling and supply power to your switch.
8