Setting The 9920 Or 9930 Print Resolution - Pitney Bowes GDI Printing System User Manual

4.3.2 Setting the 9920 or 9930 Print Resolution

1. Press FUNCTION.
2. Press 9 and then YES.
3. Press YES.
4. Press NO.
5. Press NO.
6. Press YES.
Select the preferred resolution:
Press 1=200 DPI/FINE or...*Press 2=400 DPI/EX-FINE
*Note: This resolution requires an optional DRAM memory card and will not be
displayed without the required option installed. Refer to Section 3, "Memory
Requirements."
7. Press YES.
8. When the "SETTING UP" display goes away (about 2 seconds), and "SET SECURE
ACCESS" appears, press STOP. Printer resolution setup is complete.
Note: The "Enter Passcode" prompt may not
appear. If it does, enter our Model number,
e.g., 9920 (or current Set-up Passcode) then
press YES to continue.
Selecting "1" displays:
FUNCTION SELECTION
ENTER FUNCTION #
SET OPTIONS?
ENTER YES OR NO
ENTER PASSCODE
_ _ _ _
AUTOMATIC REPORTS?
ENTER YES OR NO
PARALLEL I/F SET UP?
ENTER YES OR NO
PRNT/RCV RESOLUTION?
ENTER YES OR NO
PRNT/RCV RESOLUTION
1=200 DPI/FINE
* SETTING UP *
1=200 DPI/FINE