Initializing Your Machine - imagistics RS-232C User Manual

3. Use the cursor key to choose the data parity. Choose between
None, Odd, or Even. Then press ENTER.
(Model DL170 or ix3010's LCD)
Parity
4. Use the cursor key to toggle between 1 or 2 stop bits. When you
see the setting you want, press ENTER.
(Model DL170 or ix3010's LCD)
Stop Bit
5. Use the cursor key to toggl between 7 or 8 bits data length.
When you see the setting you want, press ENTER.
(Model DL170 or ix3010's LCD)
Data Length

Initializing your machine

1. Make sure your fax is connected to your computer (see page 3).
2. Computer: Make sure that your fax software is running and in
receive mode.
Note: If necessary, consult your fax software's instructions.
3. Your machine:
On the DL170 and ix3010:
Press Program key, F, 1, 0, 2, ENTER.
On the 3500:
Press MENU, 6, 1, 0, 2, ENTER.
PC-FAX Connection
It will take a few moments to initialize the settings.
6
:None
/ /Enter
:1 bit
/ /Enter
:8 bit
/ /Enter
(Model 3500's LCD)
Parity
(Model 3500's LCD)
Stop Bit
(Model 3500's LCD)
Data Length
:None
/ /Enter
:1 bit
/ /Enter
:8 bit
/ /Enter