Table of Contents
Advertisement
•WinFax PRO
Ver.7 for Windows
Note: This setting is just for the RS-232C port. It does not
change the speed at which your machine sends faxes.
Parity: Use the cursor key to
choose the data parity.
Choose between None, Odd,
or Even. Then press ENTER.
Stop Bit: Use the cursor key
to toggle the between 1 or 2
stop bits. Then press ENTER.
Data Length: Use the cur-
sor key to toggle between 7 or
8 bits data length. Then press
ENTER.
3. When you are finished setting for RS-232C parameters, select
"Exit" then press ENTER.
8
Ver. 4 for Windows
TM
©
95
3.1 or
©
Advertisement
Table of Contents
