Freecom Storage Gateway NETWORK HARD DRIVE Manual page 44

Freecom Storage Gateway (FSG)
Adding a new connection
GB
To add a new VPN connection, click the 'Add connection' button.
3
Options
Status
Name*
Remote Host IP*
Remote Network*
ESP encryption
IKE encryption
Pre-Shared Key
Action
Alive ping IP
Additional subnet
* Fields with an asterisk (*) need to be filled out. All the rest is for experts and can be left as is.
44
Description
You can choose to enable or disable the connection.
This is the name which will refer to the VPN connection. It is
used for internal use only.
This is the IP address of the remote host you wish to reach. If
you which to allow any IP (Road Warrior) type enter: 0.0.0.0.
This is the remote network you wish to reach. Example:
192.168.20.0/24
ESP encryption options
IKE encryption options
Fill in your pre-shared key here. Please ask your network
administrator for more info
You can specify if you want a listening only connection or a
full connection.
Here you can enter an IP address where a ping is sent every 15
minutes. This maintains a connection whenever the server
times out due to lack of activity on the other side.
If you want to route another subnet via the VPN tunnel, enter
its IP address here (e.g., 192.168.50.0/24).