Freecom Storage Gateway NETWORK HARD DRIVE Manual page 21

Do you want your FSG to have a fixed IP address (WAN port)? If yes, select 'Yes' and press
'Next'. If this is not the case, press 'No' and then 'Next'.
Fixed IP address
You can enter the IP address, subnet mask, Gateway and (multiple) DNS servers to be
used by the FSG WAN port in this form.
IP address:
Subnet mask:
Standard Gateway:
DNS servers:
Enter an IP address that falls within your router's address
range.
This IP address provide you with access to the FSG from
within your local network.
Enter the subnet mask of your router (example:
255.255.255.0).
IP address of your router, e.g., 192.168.2.1.
Enter the IP address of your router here.
Quick Set-up
21
GB
2