Remote Controller And Care; Using The Remote Controller - Pioneer DEH-P900HDD Operation Manual

R
emote controller and care
Installing the batteries
• Remove the cover on the back of the
remote controller and insert the batteries
with the (+) and (–) poles pointing in the
proper direction.
Precaution:
• Use only AAA or IEC R03 1.5 V batteries.
• Remove the batteries if the remote controller is not
used for a month or longer.
• Do not attempt to recharge the supplied batteries.
• Do not mix new and used batteries.
• If the event of battery leakage, wipe the remote con-
troller completely clean and install new batteries.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public institution's rules that apply in your
country/area.
U
sing the remote controller
Precaution:
• Do not store the remote controller in high tempera-
tures or direct sunlight.
• The remote controller may not function properly in
direct sunlight.
• Do not let the remote controller fall onto the floor,
where it may become jammed under the brake or
accelerator pedal.
• When the remote controller is not in use, attach it
firmly to the provided mounting base.
• If you press the FUNCTION button on the remote
controller while pressing the BAND button on it, the
remote controller will not function properly. To can-
cel this setting, press the AUDIO button on the
remote controller while pressing the BAND button
on it to return to the previous setting.
• When VOLUME extends outward, the remote con-
trol may not work properly.
FUNCTION button and AUDIO button
Operation of the FUNCTION button and the
AUDIO button on the remote controller differs
from the operation of the FUNC button and the
AUDIO button on the head unit. When operat-
ing the head unit, use the FUNC button and the
AUDIO button to select the appropriate menu,
then use the multi-function buttons to select the
mode. When operating the remote controller,
however, switch through the modes as
described below to select the mode.
8