SL4050/B12/E SmartLink Series 12-Line VoIP SIP Phone SL4050/B2/E SmartLink Series 2-Line VoIP SIP Phone Quick Start Guide Approval The Model SL4050 phones are not approved for, and are not intended for, connection to the Public Switched Telephone Network (PSTN). Sales Office: +1 (301) 975-1000 Technical Support: +1 (301) 975-1007 Part Number: 07MSL4050-QS, Rev.
Page 2
The SmartLink SIP Phone contains no user serviceable parts. • The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel WARNING • Mains Voltage: Do not open the case when the power cord is attached.
1.0 Before you begin The VoIP SIP phone can be set up using the keypad and a web browser, such as Internet Explorer. If you pur- chased this product to make a VoIP call, you must have either an Ethernet-based Cable or a DSL modem with an active connection to the Internet.
Page 4
1.2 Overview of the SL4050/B12/E key functions 2x16 Characters LED Display LED Indicator Voice Message 3-Way Conference Down OK/Right Cancel Cancel/Left Phone Book Menu Menu Phone Book Local Multi-Line Mute/Function Mute/Func Transfer Transfer Numeric Keypad Redial/Call History Redial PQRS WXYZ...
Page 5
1.3 Overview of the SL4050/B2/E key functions 2x16 Characters LED Display LED Indicator Voice Message 3-Way Conference Down OK/Right Cancel Cancel/Left Menu Phone Book Menu Phone Book Mute/Function Mute/Func Transfer Transfer Numeric Keypad Redial/Call History Redial PQRS WXYZ Hold Hold Speaker Phone Speaker Item...
Page 6
1.4 Numeric Keypad Definitions You can use alphanumeric characters to enter details into the Phone Book, to create text and e-mail messages. The table below shows the characters that you can enter in the different text modes. Text Mode Text Mode Normal (ABC) Numeric (0-9) Normal (ABC)
SmartLink 4050/10 VoIP SIP Phone Power adapter Ethernet Cable (included with Ethernet Cable (optional) SL 4050/10 phone) Router/Hub (optional) Internet or optional WAN Cable/xDSL PC (optional) modem Connecting the SL4050/B12/E SIP Phone Figure 1. SmartLink 4050 Series Quick Start Guide...
Page 8
If you will not be connecting a PC to the phone, go to step 3. Otherwise, connect an Ethernet cable into the LAN port of the SIP phone (see on page 7 for SL4050/B12/E or for SL4050/B2/ figure 1 figure 2 E).
3.0 Setting up the VoIP SIP phone Press the MENU key Display Name: Your name ADSL DIALUP: Enable Disable ENABLE/DISABLE ADSL DIALUP: ADSL DIALUP: ENABLE DISABLE ADSL ID: My_ADSL_ID ADSL Password: ******** DHCP: Enable Disable ENABLE/DISABLE IP Address: IP Address: AUTO 010.000.000.100 Subnet Mask:...
Page 10
SNTP Cycle: Do Not Disturb: ENABLE/DISABLE CF Unconditional: ENABLE/DISABLE CF User Busy: ENABLE/DISABLE CF No Answer: ENABLE/DISABLE Anonymous Call: ENABLE/DISABLE Anony Call Rej: ENABLE/DISABLE Ringing 1~9 1~4: Tone Ringing Type: 5~8: Melody 9: MP3 Ringing 1~4/5~8/9 WAN MAC Address: 00D0E9123456 M2 ~ M12 SL4050/B12 M2 Setting:...
4.0 Logging in to the web interface The configuration menu can be accessed using a web browser. Open a web browser (Internet Explorer, Netscape Navigator, or equivalent). Type in the IP address of the phone followed by: 9999 (for example http://192.168.1.1:9999). The IP address is provided by your Internet service provider (ISP).
4.1 Network Settings - DHCP Click on Dynamic host configuration protocol (DHCP) for IP address information that is obtained automatically from your ISP. The DNS Server information is obtained from your ISP. DHCP configuration window Figure 7. 4.2 Network Settings - PPPoE Select PPPoE if your ISP uses PPPoE.
4.3 Network Settings - Static IP Select Static IP if all Wide Area Network IP information is provided to you by your ISP. Static IP configuration window Figure 9. IP Address: IP address assigned to you by your ISP • Router IP: Router IP address •...
4.4 SIP Settings Click on SIP Settings to display the configuration window (see figure 10). Session initiation protocol (SIP) is the most popular VoIP standard. It enables two or more people to make phone calls, share multimedia, and make multimedia conference over the Internet. You should have an administrator set up these settings for you or obtain the information directly from Note your SIP service provider.
4.5 SIP Account Settings Click on SIP Account Settings to display the configuration window (see 11). You can have up to four figure accounts—that is, the SIP phone can receive calls from up to four different phone numbers. SIP Account Settings window Figure 11.
5.0 Making a phone call 5.1 Dialing an IP address Lift the handset or press the SPEAKER button. SPEAKER Dial an IP address. For example, to dial 192.168.0.1 press: WXYZ Press or wait until the timer expires to dial. 5.2 Dialing a SIP number You must register with a SIP server before using a SIP number.
6.0 Operating the Internet Radio Press to turn on the Internet radio. Press to choose a preferred station. Phone Book Press to turn off the Internet radio. Cancel 6.1 Key Definitions for Internet Radio Definition Definition Turn on the Internet Radio Increase / decrease the volume Pause / Play Display the name of the current station...
7.0 Additional Information The complete SmartLink 4050 Getting Started Guide is located on the CD-ROM that came with your SIP phone. It can also be downloaded for viewing from www.patton.com. A.0 Compliance Information A.1 Compliance EMC: FCC Part 15, Class B •...