Chapter 2 Sd Print Settings; Selecting The Color Mode - Panasonic DP-C266 Operating Instructions Manual

Chapter 2

Selecting the Color Mode

When printing directly from the SD Memory Card or USB Flash Memory, you can select the color mode.
The default Color mode settings can be changed with the Function Parameter "30 SD Print Settings (00 Color
Mode)" (Printer Settings > General User Mode). Refer to Printer Settings in the Operating Instructions (For
Function Parameters) of provided CD-ROM.
The manually selected Color mode settings will return to the default settings under the following conditions.
- If the Reset key is pressed.
- If Auto Reset Time interval has lapsed (default = 1 min).
- If the power is turned OFF.
1
Select "More Settings".
To display "More Settings", refer to steps 1
to 6 of Printing from SD Memory Card
(see page 11) or steps 1 to 6 of Printing
from USB Flash Memory (see page 14).
2
Select "Color Mode".
Ex: When "More Settings" is selected in
"Thumbnail/Index Print" tab.
26
Color Original
Print in color
Print in
monochrome
3
Select the desired color mode and
then select "OK".
4
Select "Close".
For the following procedure, refer to steps 7
to 9 of Printing from SD Memory Card
(see page 13) or steps 7 to 9 of Printing
from USB Flash Memory (see page 15).
SD Print Settings