Basic Transmission Settings; Contrast; Resolution - Panasonic DP-2500 Operating Instructions Manual

BASIC OPERATIONS

Basic Transmission Settings

You can temporarily change the transmission settings either before or after you place the original on the ADF.
These settings are as follows:
After the document(s) have been sent, your machine will automatically return to the preset settings.

Contrast

(see Note 1)
Your machine is preset to Normal contrast. If you wish to send an original with lighter contrast, change the
setting to Lighter. If you wish to send a original with darker contrast, change the setting to Darker.

Resolution

(see Note 2)
Your machine is preset to Standard resolution, which is suitable for most originals. If you want to send it with
more detail, change the setting to Fine or Super-Fine.
(see Note 3)
NOTE
1. To change the preset Contrast position, change the setting of Fax Parameter No. 001. (See page 33)
2. To change the preset Resolution position, change the setting of Fax Parameter No. 002. (See page 33)
3. If you send a photographic original with gray tones, set the Resolution to Fine or S-Fine (406 x 391 dpi) and the
Original setting to Text/Photo or Photo. The reproduction of the received document will be determined by the
capability of the remote station.
38
• Contrast
• Resolution
• Original (Text/Photo)
• Stamp
Lighter
LIGHTER
for standard originals
STD
for detailed originals
FINE
for finer detailed originals
S-FINE
• Communication Journal
• Duplex Scan
• Cover Sheet
• Password-XMT
Normal Darker
DARKER