Top Cover; Main Board Assembly - Packard Bell EasyNote W3 Series Disassembly Manual

8. Disconnect the cable connector from the modem connector board.

Top Cover

Follow the steps below to remove the top cover:
1. First remove the screws (2xA, 2xL).
2. Then remove the screws (4xJ).
Note: Make sure that during re-assembly the clips of the top cover lock into place before
fastening the screws.

Main Board Assembly

To remove the main board from the top cover, follow the steps below:
1. Flip the top cover around.
2. Disconnect left speaker connector from main board.
3. Remove the screw (1xN).
Fig. 22
The bottom cover.
Fig. 23
The top cover.
12