Download Print this page

Honeywell Wireless Communication Card Installation Instructions page 4

For tb7200/7300/7600 series communicating thermostats

Advertisement

WIRELESS COMMUNICATION CARD FOR TB7200/7300/7600 SERIES COMMUNICATING THERMOSTATS
DISCLAIMER
NO WARRANTY. Honeywell, Inc. (herein after referred to as "Honeywell") makes no warranty as to the accuracy of or
use of this technical documentation. Any use of the technical documentation or the information contained therein is
solely at the risk of the user.
Documentation may include technical or other inaccuracies or typographical errors. Honeywell reserves the right to
make changes to this document without prior notice, and the reader should in all cases consult Honeywell to determine
whether any such changes have been made. The information in this publication does not represent a commitment on
the part of Honeywell.
Honeywell shall not be liable for incidental or consequential damages resulting from the furnishing, performance, or use
of this material.
Electronic controls are static sensitive devices. Discharge yourself properly before manipulation and installing the
Honeywell wireless gateway.
Honeywell, Inc. may not be held liable for continued reliable, or robust operation of any and all wireless based devices.
Although Honeywell has taken many precautions in assuring the robustness of the TB7200/7300/7600 Series wireless
thermostat product line and associated network access point. Please note; future application of additional wireless
devices utilizing the same or similar channels and / or frequencies may degrade performance of overall system and / or
reliability.
Non-approved modifications or changes made to the wireless communication card or wireless thermostats may void the
FCC compliance of the and wireless thermostats.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifica-
tions to this equipment. Such modifications could void the user's authority to operate the equipment.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
customer.honeywell.com
® U.S. Registered Trademark
© 2011 Honeywell International Inc.
62-2020—03 M.S. Rev. 09-11
Printed in United States

Advertisement

loading