Download Print this page

Honeywell Wireless Communication Card Installation Instructions

For tb7200/7300/7600 series communicating thermostats

Advertisement

Quick Links

Wireless Communication Card for
TB7200/7300/7600 Series
Communicating Thermostats

BEFORE YOU BEGIN

Included in the wireless card package you should find the following items:
• The wireless communication card
• A local antenna
A #2 phillips screwdriver is required for installation.
To add the Honeywell wireless thermostat network to a WEBs system, you need two .jar files for the WEBStation-AX.
You can download these files from the Honeywell Buildings Forum at buildingsforum.honeywell.com.
.Jar Files Needed:
• Wireless Thermostat Network Driver: WirelessTstat.jar, version 4.0.4.8 or greater.
• Wireless Thermostat Device and Point Configuration: Wireless TstatDevices.jar, version 4.0.4.8 or greater.

More Information

We recommend downloading the Honeywell Wireless Installation and Integration Reference Guide for the TB7200,
TB7300, and TB7600 Series Thermostats (Form No. 63-4522) from http://customer.honeywell.com before you begin
installation.

INSTALLATION INSTRUCTIONS

APPLICATION
The Honeywell wireless communication card (TB-VWG-APP-1014)
and related WirelessStatNetwork.jar driver file are designed for use
with WEBs-AX controllers to integrate Honeywell TB7200, TB7300,
and TB7600 Series wireless thermostats into a WEBs-AX building
control system. This card allows the integrator to work in the familiar
Workbench tool set using any of the TB7200, TB7300, and TB7600
Series wireless thermostats.
The wireless communication card and TB7200, TB7300, and
TB7600 Series thermostats use ZigBee
wireless thermostats are ideal for retrofit applications where the
addition of communicating field bus wiring in the building space is
difficult or cost prohibitive.
This document covers the mounting of the wireless communication
card in a WEBs-AX controller.
®
wireless mesh. The
Place Bar Code Here
62-2020-03

Advertisement

loading

Summary of Contents for Honeywell Wireless Communication Card

  • Page 1: Installation Instructions

    • A local antenna A #2 phillips screwdriver is required for installation. To add the Honeywell wireless thermostat network to a WEBs system, you need two .jar files for the WEBStation-AX. You can download these files from the Honeywell Buildings Forum at buildingsforum.honeywell.com.
  • Page 2 Also, be careful to plug the wireless communication card into its connector properly (pins aligned). • Only one the wireless communication card can be installed in a WEBs-AX controller. Always install the card in option slot 1 in WEB-2xx and WEB-6xx models. Option slot 1 or 2 can be used on WEB-7xx models.
  • Page 3: Specifications

    WIRELESS COMMUNICATION CARD FOR TB7200/7300/7600 SERIES COMMUNICATING THERMOSTATS STATUS LED INDICATORS See the table below for status indicators on the wireless communication card. Table 1. Status LED Indicators Indicator Description 1 x 200ms short blink Power on 2 x 200ms short blinks...
  • Page 4 Electronic controls are static sensitive devices. Discharge yourself properly before manipulation and installing the Honeywell wireless gateway. Honeywell, Inc. may not be held liable for continued reliable, or robust operation of any and all wireless based devices. Although Honeywell has taken many precautions in assuring the robustness of the TB7200/7300/7600 Series wireless thermostat product line and associated network access point.