Table of Contents
Advertisement
Selecting the power tap (CF-4TX only):
Make sure the power amplifier is turned off when adjusting the power taps or making
connections.
1. Select the desired power tap by turning the switch
with a flat-ended screwdriver.
If you are using a 70 V system, the wattage ratings are:
16, 32, 64 and 128 W.
If you are using a 100 V system, the available wattage
ratings are: 32, 64, and 128 W.
Make sure that you do not overload the amplifier. This may
cause overheating to the amplifier, and possible damage to
your loudspeakers. To avoid overloading, make sure that the
selected taps on each bracket in the line add up to no more
than 80% of the rated power of the amplifier being used.
7
CF-4LZ/CF-4TX–
Advertisement
Table of Contents
