Safety Instructions - EAW CF-4LZ Installation Manual

1. SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Only use attachments/accessories specified by the manufacturer.
10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
11. The entire sound system must be designed in compliance with the current standards and laws
regarding electrical systems.
WARNING! This equipment has been designed to be installed by qualified professionals only!
There are many factors to be considered when installing professional sound reinforcement
systems, including mechanical and electrical considerations, as well as acoustic coverage and
performance. EAW Commercial strongly recommends that this equipment be installed only by a
professional sound installer or contractor.
Dimensions

– CF-4LZ/CF-4TX
Part No. 0023395 Rev. A 05/2008
© 2008 LOUD Technologies Inc. All Rights Reserved.
The exclamation point within an
equilateral triangle is intended to
alert the user of the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the apparatus.
Clip Fit Bracket with speaker attached