Download Print this page

Dualit Architect CJKI Instruction Manual page 2

Architect kettle

Advertisement

KNOW YOUR KETTLE
A.
LID
A
B.
TOUCH PAD
C.
LID PANEL
B
D.
SPOUT
E.
WATER FILTER
C
F.
STAINLESS STEEL BODY
G.
LID RELEASE
D
H.
VIEWING WINDOW
I.
BODY PANEL
J.
ON/OFF SWITCH
E
K.
POWERBASE
F
All illustrations are for representation only, your
model may vary from illustrations shown.
BEFORE FIRST USE
1
POSITION
2
CORD TIDY
Place the kettle as close to the wall socket
Use the shortest cord possible. Wrap excess
as possible. When in use ensure the kettle is
cord round the cord tidy on the base of the
not placed under kitchen cabinets.
kettle.
In the interest of improving products, Dualit Ltd. reserves the right to change
the product specification without prior notice.
3
PLUG IN
Plug the kettle into the power socket and
turn the power on. When not in use ensure
the kettle is unplugged.
FILLING YOUR KETTLE
1
OPEN LID
Press the lid release button on the handle to
open the lid.
WARNING: IF THE KETTLE HAS
G
JUST BOILED, IT WILL BE FULL OF
STEAM, WHICH WILL ESCAPE AS
H
SOON AS THE LID IS OPENED.
BOILING WATER
4
TURN ON
I
J
K
Press the 'On/off' switch down. The viewing
window will illuminate and the kettle will
start to heat up.
If the kettle is accidentally switched on with
no water inside, the boil-dry device will
switch off the heating element to prevent
damage to the kettle.
CLEANING & CARE
1
THE BODY
Let the kettle cool down completely before
cleaning.
Wipe the outside and inside surfaces of the
kettle with a damp cloth
2
FILLING
3
CLOSE LID
Fill the kettle through the lid opening. Do not
Push the lid down using the touch pad to
fill through the spout.
close.
Save energy, only boil what you require. Use
WARNING: IF THE KETTLE HAS
at least one cup of water (250ml). The water
JUST BOILED, THE LID WILL BE
level must stay below the 'max' mark.
HOT. USE THE TOUCH PAD TO
CLOSE THE LID.
5
TURN OFF
6
POURING
The kettle will automatically turn off after the
To avoid the risk of splashing, once the kettle
water has boiled.
has boiled wait 10 seconds then pour slowly.
Do not over-tilt the kettle.
To turn off before the water has boiled lift
the 'On/off' switch up.
2
WATER FILTER
3
DESCALE REGULARLY
Use descaling products suitable for kitchen
appliances, these are readily available online
or from most supermarkets or department
stores. Use as per instructions on the packet.
Follow these few simple steps to minimise
scale build up in your kettle: Empty the kettle
after each use; do not allow water to stand
in the kettle overnight. Use filtered water
instead of tap water. Descale the kettle
Open the lid. Hold the top of the filter, pull
regularly, at least once a month. If you live in
up and out of the kettle. Rinse under a tap
a hard water area you may need to descale
while carefully brushing it with a soft brush.
more often. When descaling has finished,
empty the kettle and rinse it out numerous
Rinse the kettle out with fresh water.
times with fresh water, then refill with fresh
water, boil, then discard boiled water.

Advertisement

loading