Safety Precautions - Dualit Catering Pop Up Toaster Instruction Manual & Guarantee

Catering pop up toaster
Table of Contents

Advertisement

IB-DCP4-A_14.02.11_Layout 1 14/02/2011 12:52 Page 4

SAFETY PRECAUTIONS

READ ALL
INSTRUCTIONS
BEFORE USING THE TOASTER
KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE
WARNING: This appliance must be
earthed.
We recommend that the toaster is
plugged into a socket that has no other
appliance connected to it.
Failure to do this may cause an
overload, trip a circuit breaker or blow
a fuse. Preferably the socket outlet
should be protected by a Residual
Current device (RCD)
Before plugging in, check that the
voltage on the rating label is the same
as the mains supply.
To protect against electric shock, do
not immerse any part of this product
in water or other liquid.
Unplug from outlet when not in use
and before cleaning. Allow to cool
before putting on or taking off parts.
Do not operate the appliance with a
damaged cord or plug.
Do not allow cable to touch hot
surfaces, or to hang over edge of a
table or counter top.
When in use a fire may occur if the
toaster is covered or touching
flammable material.
Do not attempt to dislodge bread
when the toaster is plugged in.
Bread may burn. Therefore toasters
must not be used near or below
curtains and other combustible
materials.
When toasting do not leave appliance
unattended.
THIS IS AN ATTENDED APPLIANCE
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
Children should be supervised to
ensure that they do not play with this
appliance.
Do not store toaster in an appliance
garage or cover.
Do not use outdoors.
The toaster is not intended to be
operated by means of an external timer
or separate remote-control system.
Accessible surfaces of the toaster may
get hot during use.
NOTE: Any plug cut from power
supply cord should be disposed of
immediately. Inserting any cut off Plug
into a 13A socket-outlet is hazardous.
4
Never use the plug without the fuse
cover fitted. Ensure replacement fuse is
the same current value as original.
Replacement fuses should be ASTA
approved to BS 1362.
Do not operate any appliance with a
damaged lead or plug, or after the
appliance malfunctions, or has been
damaged in any manner.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
SAVE THESE
INSTRUCTIONS
Where used this symbol
denotes surfaces may get
hot during use.
In the interest of improving products, Dualit Ltd. reserves the
right to change the product specification without prior notice.
IMPORTANT -
BEFORE USING
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcp4

Table of Contents