The Controls; Setting Up; Removable Blades; Assembling - Dualit The Blender Instruction Manual & Guarantee

SETTING UP

DO NOT LET CORD HANG OvER EDGE OF TABLE OR COUNTERTOP
AND POSITION AWAY FORm THE EDGE
1
CORD TIDY SECURE TO SURFACE
Unwind the required length Place the blender on a level
of cord. It is important to surface and push down so
keep the cord short. Wrap the sucker feet stick to the
the excess cord length surface.
round the cord tidy.

REMOvABLE BLADES

CAUTION:THE BLADES ARE vERY SHARP! ENSURE THE GASKET IS IN
PLACE BEFORE USING.
1
THE GASKET
LOCKING BLADE
Ensure the gasket is seated Align the blade assembly to
on the collar of the blade base of the jar. Using your
correctly before inserting fingers, ROTATE
into the jar. It can be placed ANTI-CLOCKWISE TO
on either way round. TIGHTEN then use the
tool to lock in to place.
3
RINSE AND DRY
Rinse and dry the jar, lid and
blades before every use.
3
REMOvING BLADE
To remove the blades use
the tool provided. Insert and
rotate the blades
CLOCKWISE TO
LOOSEN. Continue to
unscrew and lift to remove.
8

ASSEMBLING

CAUTION: NEvER USE THE BLENDER WITHOUT THE BLADES AND LID
CORRECTLY IN PLACE. NEvER RUN THE BLENDER EmPTY.
1
THE jAR
ADD INGREDIENTS
Position the jar with blade
Add your ingredients to the
on the main body. It can be
jar. Cut large items in to
located in 8 positions. If not
evenly sized 2cm chunks.
correctly positioned the
Do not fill above 2.0L. For
function lights on the control
ice, warm or solid items do
panel will not illuminate.
not fill above 0.75L - 1L.
STARTING & STOPPING
NOTE: TO PREvENT OvER PROCESSINGTHE BLENDERWILLAUTOmATICALLY
STOPAFTER 1ANDA HALF mINUTES. ALL OFTHE LIGHTSWILL FLASH 3TImES.
1
MAIN POWER
TO START
Plug in the blender then To start blending, press one
press the main on/off button. of the blending cycles as
All the lights will illuminate described on the next pages.
solid if the jar is in place and Only the button selected will
the blender is ready to go. illuminate.
3
THE LID
Attach the lid by pushing
down while applying a slight
twisting action.
Place your hand on the lid to
hold the blender steady. Use a
heat proof gloved hand when
blending hot items.
3
TO STOP
To stop blending, press the
stop button at any time, this
will be illuminated red. Always
turn main power off & unplug
after each use.
9