Table of Contents
Advertisement
Block Ping of Death
Block ICMP Fragment
Block Unknown Protocol
Warning Messages
Vigor2850 Series User's Guide
Many machines may crash when receiving ICMP datagrams
(packets) that exceed the maximum length. To avoid this
type of attack, the Vigor router is designed to be capable of
discarding any fragmented ICMP packets with a length
greater than 1024 octets.
Check the box to activate the Block Ping of Death function.
This attack involves the perpetrator sending overlapping
packets to the target hosts so that those target hosts will
hang once they re-construct the packets. The Vigor routers
will block any packets realizing this attacking activity.
Check the box to activate the Block ICMP fragment
function. Any ICMP packets with more fragment bit set are
dropped.
Check the box to activate the Block Unknown Protocol
function. Individual IP packet has a protocol field in the
datagram header to indicate the protocol type running over
the upper layer. However, the protocol types greater than 100
are reserved and undefined at this time. Therefore, the router
should have ability to detect and reject this kind of packets.
We provide Syslog function for user to retrieve message
from Vigor router. The user, as a Syslog Server, shall receive
the report sending from Vigor router which is a Syslog
Client.
All the warning messages related to DoS Defense will be
sent to user and user can review it through Syslog daemon.
Look for the keyword DoS in the message, followed by a
name to indicate what kind of attacks is detected.
132
Advertisement
Table of Contents
