Draytek VIGOR2820 series Quick Start Manual page 9

Interface
Factory Reset
LAN (1-4)
DSL
WAN 2
USB
PWR
ON/OFF
Vigor 2820 Series Quick Start Guide
Description
Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the
factory default configuration.
Connecters for local networked devices.
Connecter for accessing the Internet through ADSL2/2+.
Connecter for remote networked devices.
Connecter for a USB device (for 3G USB Modem or printer).
Connecter for a power adapter.
Power Switch.
3