Table of Contents
Advertisement
Installing Book Cards
1. Turn your product off.
2. Turn your product over.
3. Align the tabs on the book card
with the notches in the slot.
4. Press the book card down until it
snaps into place.
Removing Book Cards
Warning: Never install or remove a
book card while your product is on. Any
information that was entered in the built-
in book or book card will be erased.
Book Card Troubleshooting
If your book card is performing erratically,
follow the reset instructions on page 72. If
this does not fix the problem, remove the
book card and then remove the white rub-
ber strip located between the two metal
pins. Clean the rubber strip with your fin-
gers and then replace it making sure it is
completely in its notch.
Selecting a Book
Once a book card is installed in the product,
you can select which book you want to use.
1. Turn your product on.
2. Press KARTE.
These are sample books.
3. Press
or
selection.
For information on available
Franklin Bookman products, high-
light the Bookman Info Icon,
4. Press EINGABE to select it.
About Screen Illustrations
Some screen illustrations in this User's
Guide may differ slightly from what you
see on screen. This does not mean that
your product is malfunctioning. The exam-
ples in the English half of this manual use
English as the message language.
47
to highlight your
.
Advertisement
Table of Contents
