Viking E-10A Product Manual

Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Provide Convenient Handsfree Communication
The E-10A and E-20B are telephone line powered
entry phones designed to provide two-way handsfree
communication. Both function identically, but are avail-
able in two different housings to better suit the appli-
cation. When the "Call" button is pressed, the E-10A
or E-20B will come off-hook and will remain off-hook
until a CPC signal is detected, the programmed time-
out has elapsed, a busy signal is detected, or the call
goes silent, making the unit automatically disconnect.
The E-10A/20B can be connected directly to a C.O.
line or analog PABX/KSU station when programmed
as a ringdown circuit, or used with a Viking Dialer. If
a line or station is not available, Viking's DLE-200B
ring down circuit can be used. One to four E-10A/20B
speaker phones can share an existing phone line in a
house or small business when used with a Viking C-
200, C-250 or C-2000B Entry Phone Controller.
The E-10A-EWP and E-20A-EWP shares all of the
features of the E-10A and E-20B in addition to En-
Features
• Alternate action call button to place or cancel a call
• Intelligent call progress detection for automatic hang-
up on CPC, silence, busy signal, or time out
• Telephone line powered
• Weather resistant features: mylar speaker, gaskets, in-
ternally sealed push button switch, UV stable exterior,
enamel coated PCB
• E-10A-EWP and E-20B-EWP are designed to meet
IP66 Ingress Protection Rating (see DOD# 859)
• Adjustable microphone and speaker volume
• Programmable maximum call length
• Selectable auto-answer feature allows remote moni-
toring
• Two way handsfree communication
• Programmable VOX (mic/speaker) switching speed
E-10A/E-10A-EWP Features:
- Vandal resistant, black powder painted, aluminum
face plate with heavy duty 316 stainless steel call
button and mounting gasket
- Flush mountable using included plastic rough-in box
part # 259576
- Surface mount with optional VE-5x5 (DOD# 424)
E-20B/E-20B-EWP Features:
- Light gray colored, impact resistant, U.V. stable,
plastic chassis
- Surface mountable only
www.vikingelectronics.com
Information: (715) 386-8861
PRODUCT MANUAL
E-10A/E-10A-EWP
hanced Weather Protection (EWP) for outdoor instal-
lations where the unit is exposed to precipitation or
condensation. EWP products feature foam rubber
gaskets and boots, sealed connections, gel-filled butt
connectors, as well as urethane or thermal plastic pot-
ted circuit boards with internally sealed, field-ad-
justable trim pots and DIP switches for easy on-site
programming. For more information, see DOD# 859.
Applications
• Door or gate communication, business delivery en-
trances
• Use with a Viking C-200 or C-250 to control an E-10A
or E-20B on a single line
• Use with a Viking C-2000B to control 1 to 4 E-10A/E-
20B's and door/gate control on a single phone line
• Provide unique front and back door chimes and pag-
ing when used with a Viking SLP-1, SLP-4 and C-
2000B
• Residential, commercial and industrial door security
• Use with a Viking K-1900-5 or K-1900-30 for auto-
matic speed dialing on telephone lines or analog
PABX/KSU station ports
• Use on any analog PABX station port with program-
mable ringdown capability
Specifications
Power: Telephone line powered (18 VDC/20mA minimum)
Dimensions: E-10A: Overall: 127mm x 127mm x 57.2mm (5"
x 5" x 2.25"), Rough-in box: 102mm x 102mm x 57mm (4" x
4" x 2.25") E-20B: 140mm x 115mm x 38mm (5.5" x 4.5" x 1.5")
Shipping Weights: E-10A: 0.91 kg (2 lbs), E-20B: .75 kg (1.5
lbs)
Standard E-10A/E-20B Environment: -34° C to 65° C (-30°
F to 150° F) with 5% to 95% non-condensing humidity
E-10A/E-20B-EWP Environment: -34° C to 65° C (-30° F to
150° F) with up to 100% condensing humidity
Speaker Volume: Approximately 70db maximum @ 1m
Ring Voltage: 25V AC RMS minimum
CPC Disconnect Time: 300ms minimum
REN: 0.8A
Connections: (2) gel-filled butt connectors
E-10A/EWP
E-20B/EWP
Speaker Phones
November 30, 2012
E-20B/E-20B-EWP