Table of Contents
Advertisement
Maintenance and Troubleshooting
Chapter 9
Cleaning the TV and Remote Control
1. Remove the power adapter cable from the TV.
2. Use a soft cloth moistened with diluted neutral cleaner to clean the TV and remote control. VIZIO
recommends using an HDTV cleaning solution which can be purchased at any major retailer.
3. Wring liquid out of the cloth before cleaning to prevent water from penetrating into the housing.
4. Wipe the TV and remote control with a dry cloth after cleaning.
Important:
•
Do not use volatile solvent (such as toluene, rosin and alcohol). Such chemicals may damage the
housing, screen glass, and remote control, and cause labeling to peel.
•
The screen glass is very fragile. Do not scrape it with any sharp object.
•
Do not press or tap the screen to avoid cracking.
Troubleshooting Guide
If the TV fails or the performance changes dramatically, check the display in accordance with the
following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the
display still fails to perform as expected, contact the VIZIO for assistance by calling 1-877-MYVIZIO (698-
techsupport@VIZIO.com.
4946) or e-mail us at
General TV Problems
Receive the error message
"No Signal."
No power.
No sound.
If the screen is black.
Version 4/23/2010
•
Press the INPUT button on the remote control to select a different input source.
•
If you are using cable connected directly to the TV or an antenna, scan
for channels from the Tuner menu in the on-screen menu.
•
Make sure the power button is ON.
•
Make sure the AC power cord is firmly connected to a live outlet.
•
Plug another electrical device to the power outlet to verify that the outlet is
working.
•
Press Volume + (Up) on the remote control.
•
Press MUTE on the remote control to make sure that MUTE is not ON.
•
Check your audio settings. The audio may be set to SAP, or the speakers are
set to off.
•
Make sure that headphones are not connected.
•
Check the audio connections of external devices that may be connected to your
HDTV.
•
If you are using an antenna, the signal strength of the channel may be low.
Make sure your antenna is connected securely to the TV and move the antenna
around the room or close to a window.
•
Make sure the power button is ON (in the case of indoor antenna use).
•
Press the INPUT button on the remote control to select a different input source.
•
Check the connections of external devices that may be connected to your
38
www.VIZIO.com
VIZIO VA26L HDTV10T User Manual
Solution
Hide quick links:
Advertisement
Table of Contents
