Advertisement
1-4. The iViewer rev. 1.3 and above supports direct connections with network cameras
when their IPs are known to the user. However, video playback can only take place
if the past videos were recorded on the VAST/ST server or NVR station. The iViewer
currently does not support video playback from the cameras' SD card.
iViewer
IMPORTANT:
If you connect via Internet to a VAST/ST server, NVR station, or cameras behind a
firewall or router,
•
When connecting to a VAST/ST server or NVR station-
If a VAST/ST server or NVR station is located behind a firewall or router,
configure port forwarding or "bypass tunnel," by mapping TCP port "3454" (for
access to VAST) on the router to your VAST/ST server or NVR station. Enter
the server's public IP and port "3454" on the iViewer configuration pane.
•
When connecting to individual cameras -
If an individual camera is located behind a firewall or router, configure port
forwarding or "bypass tunnel," by mapping TCP port "80" (camera's default for
HTTP). Enter the camera's public IP and port "80" on the iViewer configuration
pane.
Please consult your network administrator or the documentation that came with
your firewall or broadband router.
port: 80
Wi-Fi Access Point
Network Cameras
port: 80
3
LAN
Advertisement
