Advertisement
3-3. Re-arranging the View Cells
0.5 sec
Note that the snapshot images on view cells are not constantly updated. They are updated
only once a day.
If you remove a camera from a view cell uing the Delete
be listed on the device pane.
If you enlist new individual cameras to your device list, they will be automatically added
to the unoccupied view cells. However, if you enlist new cameras to a VAST server, those
cameras will not be added to the view cells.
On the Layout page. Place your finger on a
view cell for 0.5 second. When it becomes
afloat, drag it across the screen to a new
location. You can also drag a view cell across
layout pages by dragging it to the border of
your current layout, and staying there for
one second. You can then drag it to the
neighboring page.
If the target view cell is already populated by
another camera, dragging a view cell to it will
swap their positions.
If changes occurred to an existing server, e.g., adding
or removing cameras, you can pull down the device
entry for the system to reload the device data. The
software will then retry the connection and refresh all
information.
If problems still remain unsolved, you may remove
the device and insert it again. This may occur if you
upgraded your software from ealier iViewer.
19
button, the camera will still
Advertisement
