X Cueing; Playback Between Locate A And B Points - Fostex MR-8MKII Owner's Manual

MR-8mkII Owner's Manual (Advanced playback and locate functions)
By holding down the [F FWD] or [REWIND] key during playback, the recorder enters cueing
mode and you can monitor playback at 3 x speed. It may be useful for searching a specific
position.
POWERFUL NATURAL BRIGHT
MASTERING
JKL4 MNO5
LOCATE
AUTO PUNCH PLAY MODE
A / IN
PQR6 STU7 VWX8
RECORD STOP PLAY
LOCATE REC END
LOCATE ABS ZERO
A-B PLAY
[REWIND] key

Playback between LOCATE A and B points

When the LOCATE A and LOCATE B points are set, you can playback between these points once.
This function is always available regardless of the play mode setting (see "Play mode" on next
page). This function allows you to check the editing part (between LOCATE A and B points) for
copy/paste, erase, etc. See "Part editing" described later.
POWERFUL NATURAL BRIGHT
MASTERING
JKL4 MNO5
LOCATE
AUTO PUNCH PLAY MODE
A / IN
PQR6 STU7 VWX8
RECORD STOP PLAY
LOCATE REC END
LOCATE ABS ZERO
A-B PLAY
[PLAY] key
[STOP] key
<Note>: Note that this function is available only
when the LOCATE A and B points are set.
See page 51 for details about how to set the LO-
CATE A and B points.
If you carry out the operation above when
<Note>:
the LOCATE A point is set ahead of the LOCATE B
point (i.e. LOCATE A > LOCATE B), the MR-8mkII
plays back audio data from the LOCATE A point
to the REC END points once, then stops.

3 x cueing

MENU/ENTER
STORE UNDO/REDO
B / OUT
YZ9 +-_0 DELETE
REWIND F FWD
[F FWD] key
MENU/ENTER
B / OUT STORE UNDO/REDO
YZ9 +-_0 DELETE
REWIND F FWD
• By holding down the [F FWD] key during play
back, the recorder starts cueing forwards at 3 x
speed.
During forward cueing, ">>" is shown on the
display.
• By holding down the [REWIND] key during play
back, the recorder starts cueing backwards at 3
x speed.
During backward cueing, "<<" is shown on the
display.
• While the recorder is stopped, press the [PLAY]
key while holding down the [STOP] key.
The MR-8mkII plays back audio data between
the LOCATE A and LOCATE B points once, then
stops.
LOCATE A point
While the recorder is playing back between the
LOCATE A and B points, the display shows the
icon as below.
During playback, you can monitor playback
audio of the desired track(s) by raising the ap-
propriate track fader(s), the [MASTER] fader
and the [PHONES] control.
46
LOCATE B point
Playback