Advertisement
5
Original Negative
E
D
XPOSURE
ATA
Lens: 11:1 PANAVISION
Primo Zoom (26 mm)
Filter: None
Aperture: T2.8 8/10
Incident Light Levels
Key = 64fc
Color temperature = 5350K
1
Base
Acetate safety base with rem-jet
backing.
Darkroom Recommendations
Do not use a safelight. Handle
unprocessed film in total darkness.
Processing
ECN-2
Storage
Store unexposed film at 13°C (55°F) or
lower. For storage of unexposed film
longer than 6 months, store at
-18°C (0°F). Process film promptly.
Exposure Index
Daylight (5500 K)—250;
Tungsten (3200 K)—64 (with KODAK
WRATTEN Gelatin Filter No. 80A).
Laboratory Aim Density
Time negative originals relative to
Laboratory Aim Density (LAD)
Control Film supplied by
Eastman Kodak Company.
7
3
-2.8 Stops
-2.5 Stops
2
3
1
Color Balance
This film is balanced for exposure with
daylight illumination (5500 K). For other
light sources, use the correction filters
in the table below.
LIGHT SOURCE
Daylight (5500 K)
Tungsten (3000 K)
Tungsten (3200 K)
Tungsten Photoflood (3400 K)
White-Flame Arcs
Yellow-Flame Arcs
OPTIMA 32
VITALITE
Fluorescent, Cool White
Fluorescent, Deluxe Cool White
Metal Halide H.M.I.
*These are approximate corrections only. Make final corrections during printing.
†These are starting-point recommendations for trial exposures. If the type of fluorescent lamp is unknown,
use a KODAK Color Compensating Filter CC20M + CC10B with an exposure index (EI) of 125.
-1.4 Stops
4
-1.3 Stops
5
Color Compensating Filter CC20Y + CC10C
Color Compensating Filter CC30C + CC10M
†
†
4
6
8
-1.0 Stops
6
0 Stops
+.5 Stops
7
Postproduction information
When you transfer this film directly to
video, set up the telecine using negative
Telecine Analysis Film (TAF).
KODAK FILTERS ON CAMERA*
None
WRATTEN Gelatin No. 80A
WRATTEN Gelatin No. 80A
WRATTEN Gelatin No. 80A
WRATTEN Gelatin No. 80A
None
Color Compensating Filter CC20M
WRATTEN Gelatin No. 82C
None
1
2
8
+2.5 Stops
EXPOSURE INDEX
250
64
64
64
160
160
64
250
200
160
250
Advertisement
