Vertu Signature RM266V Reference Manual page 47

To turn on the WLAN search option:
»
1. Press
Men u Sett ing s
.
s e a r c h
2. Select or as required.
Off On
I n te r ne t t e l e p h o n y
Your Vertu phone supports voice calls over the internet (net calls).
To set up your phone to make and receive internet calls, you must:
be connected to a WLAN.
>
have a VoIP account with one of the VoIP service providers listed
>
in the Internet telephone setup wizard, for example, Gizmo. Your
contact must also have a VoIP account.
»
1. Press Men u Sett ing s
»
tel ep h on e Accounts
The Internet telephone setup wizard is opened.
2. Press Con n ect .
3. Select the WLAN you are connected to.
4. Select your VoIP service provider.
5. Enter your Username and Password for this service.
6. Press .
Su bmit
You can now make calls using the internet telephone feature.
To make a call using the Internet telephone function:
»
1. Press Men u Co nt ac ts
2. Select the contact you are going to call.
»
3. Press
O pt ion s In tern et ca ll
Your Vertu phone attempts emergency calls primarily
over cellular networks. If an emergency call using
cellular networks is not successful, your device
attempts an emergency call through your net call
provider. Due to the established nature of cellular
telephony, you should use cellular networks for
emergency calls if possible. If you have cellular
network coverage available, make sure that your
cellular phone is switched on and ready to make calls
before you attempt an emergency call. The capability
for an emergency call using internet telephony
depends on the availability of a WLAN network and
your net call provider's implementation of emergency
call capabilities. Contact your net call provider to
check the internet telephony emergency call
capability.
» »
Co n n e c t ivit y W LA N
» »
Co n n e ct iv it y I n t e r n e t
» .
Add new
»
N a mes .
.
M i c r o - U S B d a t a c a b l e
»
You can use the micro-USB data cable to transfer data between the
W L A N
phone and a compatible computer or a printer supporting PictBridge.
You can also use the micro-USB data cable with Vertu PC suite.
To change the USB mode, select
Co n n ec t i v i t y
To connect your phone using the micro-USB data cable:
1. Connect the data cable. A message appears on the display
U S B m o d e :
2. Select from the following options:
P C S u i t e
computer that has Vertu PC suite installed.
Pr i n ti n g & m ed i a
compatible printer, or to connect the phone to a PC to synchronise it
with Windows Media Player.
D at a s to r ag e
software and use the phone as data storage.
Packet data
Your Vertu phone can use general packet radio service (GPRS) for
high-speed data connections. With GPRS, you can stay connected to
the mobile Internet and perform faster downloads without completing
a dial-up connection. GPRS connectivity can be used to enhance
MMS messaging, Web browsing sessions, e-mail, and PC dial-up.
GPRS is typically billed as an "always-on" function and you are only
charged for the data you transfer.
Enhanced GPRS (EGPRS), also known as EDGE (enhanced data
rates for GSM evolution) is similar to GPRS but the connection is
much faster. Contact your service provider for more information
about supported data connections and tariffs.
When you have selected GPRS as a data bearer, the phone
automatically uses EGPRS (EDGE) instead of GPRS if it is available
in the network.
Packet data connection
To define when a GPRS connection is established:
1. From the stand-by display, press
Co n n ec t i v i t y
2. Scroll to one of the following options and then press
W h e n n e ed ed
when an application using (E)GPRS needs it and closes the
connection when the application finishes
A l w a ys on l i n e
an (E)GPRS network when you switch on your Vertu phone. The
icon will appear to indicate that GPRS or EGPRS service is available
If you receive a call or a text message, or make a call during a GPRS or
EGPRS connection, the
or EGPRS connection is suspended.
Packet data settings
You can connect your Vertu phone to a compatible PC using
Bluetooth wireless technology or a USB data cable connection. This
allows you to use your Vertu phone as a modem to enable (E)GPRS
connectivity from your PC.
To define the settings for (E)GPRS connections from your PC:
English
44
»
M e nu
»
U SB d a ta c a bl e .
- to use the phone to interact with applications on a
- to use the phone with a PictBridge
- to connect to a computer that does not have Vertu
»
M e n u
» »
Packet data Packet data conn.
registers and establishes an (E)GPRS connection
sets your Vertu phone to automatically register to
icon will appear to indicate that the GPRS
SETTINGS
»
Se tt i n g s
Se l e ct
»
S et ti n g s
.
.
Sel ec t