Velodyne ULD-12 Owner's Manual page 4

INSTALLATION OF ULO-12 USING FROM AMPLIFIER INPUTS
Figure 1 shows how to connect your ULD-12 to a receiver or integrated amplifier. When using the speaker
level terminals, note the right and left channel designations above the terminals. Red speaker jacks are positive,
black speaker jacks are negative (common).
SATELLITE SPEAKERS
AMPLIFIER OR RECIEVER
RIGHT LEFT
R L
+ -
+ -
Une level Use One Only Speaker Level
Velodyne Acoustics
San Jose, CA
Right
Left
In In
@ @
©
@
Out Out
Right
Left
Mono
In
@
Out
ULD·12
+
In
Made in U.S.A.
Out
NOTE: RED TERMINALS ARE
POSITIVE, BLACK
TERMINALS ARE NEGATIVE
Left
+
In
To ULD-12
' - - - - - - - - - - - - - - - Speaker Cabinet
Figure 1: Installation Using FROM AMPLIFIER Inputs
Caution: To avoid damage to your main amplifier be sure to make aU speaker
connections from RED (positive) to RED and from BLACK (negative) to BLACK. Be
sure that all connections are tight, and that there are no loose strands or frayed wires.
-2-
+
Out