Read Me First; Positioning The Device; Installing In Your Car - TomTom NAVIGATION SYSTEM Reference Manual

Read me first

Positioning the device

Consider carefully where to install your TomTom navigation device in your car. The navigation
device should not block or interfere with any of the following:
Your view of the road

Any of the controls in your car

Any of your mirrors

Any airbags

When your navigation device is installed, you should be able to reach the device easily without
leaning or stretching. You can attach the device to the windshield or you can use a Dashboard
Mount Disk to attach the mount to your dashboard. Dashboard Mount Disks are included with
some products and are available as accessories. The following diagrams show where you can
safely attach the mount.
TomTom also offers alternative mounting solutions for your TomTom navigation device. For more
information about Dashboard Mount Disks and alternative mounting solutions, go to
tomtom.com/accessories.

Installing in your car

Use the mount provided with your device to install your TomTom device in your vehicle. You can
attach your device to your windshield or use a Dashboard Mount Disk to attach your device to
your dashboard. See the printed installation instructions included with your product for more in-
formation. Read the instructions about
To install your device, do the following:
1. Choose the best location to mount your TomTom device. The location should be as smooth as
possible.
2. If you are using the Dashboard Mounting Disk, clean the dashboard and install the disk.
3. Make sure that both the suction cup on the mount and your windshield or disk are clean and
dry.
4. Press the suction cup of the mount firmly against your windshield or disk.
5. Turn the rubber grip near the base of the mount in a clockwise direction until you feel it lock.
positioning your device
8
before you install your device.