Summary of Contents for TomTom Navigator Navigator 2
Page 1
TomTom Navigator Reference Manual Page 1 TomTom Navigator 2.24.2 Reference Manual -loin of Contents 1. The Navigator View 2. The Map View 3. The Favorites view 4. The Properties 5. The GPS Status 6. Pocket Outlook 7. The London Congestion Charge 8.
Page 2
The map shows your automobile and its immediate surroundings, rotated in such a way that the direction in which you are moving is always "up". The route that TomTom Navigator recommends is emphasized in dark red.
Page 3
(or near) the manual zoom buttons (4) and (5). Repeat the last instruction If you touch the schematic arrow (10), TomTom Navigator will repeat the last spoken instruction (unless you already passed the point it referred to). Pop up the icon menu If you tap anywhere in the center of the screen, a menu will pop up offering options that are useful whilst navigating.
Page 4
Allows you to plan an alternative route to the same destination. A sub- menu will pop up with the following options: Alternative Routes Alternative Avoid Roadblock Avoid *** Original route Turns on the three-dimensional display of the map. Turn 3D View Displays the map in colors that provide extra contrast in the dark.
Point of interest and set is as a destination. position Shows the GPS management application, offering detailed information about your GPS receiver and its measurements, and allowing you to GPS Status change GPS-related properties.
Page 6
A Point of interest (POI). In this particular case, a gas station. The cursor Your current location and direction (if and when your GPS receiver has a valid satellite fix). Your last known location (after your GPS receiver loses its...
Page 7
Tap and hold on a location to pop up the action-list for that location (see the next section for details); Tap on the GPS indicator (6) to re-center the screen instantly around your current GPS position; Tap on or near the left or right arrow in the instruction bar (3) to show the previous or next route instruction;...
Page 8
Informs your GPS receiver that you are roughly near the tapped location. Reset GPS for If you have not used your GPS for more than a week, or have traveled this location more than 200 miles/300 kilometers since you last used it, this option can seriously reduce the time it takes your GPS to find satellites.
Page 9
Even so, the PLAN button (8) offers an "all-in-one" interactive dialog where you can specify a departure address, a destination address and a route type. When you press the OK button, TomTom Navigator will try to plan a route from the departure address to the destination address.
Page 10
Route instructions When you have planned a route, TomTom Navigator provides a table with detailed instructions. You can view this list by selecting the "Instructions" view from the pull-down view-switching menu (1) in the top-left corner.
Page 11
4. The Properties TomTom Navigator offers a "Properties" option from the "File" menu and the "Navigator" view menu that allows you to specify your preferences with regard to many aspects of TomTom Navigator.
Points of interest in that category are to be displayed on the map. Advanced properties Advanced properties influence the behavior of TomTom Navigator at its most basic level. Do not modify properties unless you are confident about the effects. Navigator view Display +/- Shows/hides "+"...
Redraws the map after a route has been planned, in such planned a way that the whole route is displayed route Keep GPS Continuously updates the map so that your current GPS position on position remains visible screen Route Controls how your planned route is displayed.
Warnings Provides a warning when you are on a route that passes through the London Congestion Charge zone. Avoid area Forces TomTom Navigator to always avoid the London Congestion Charge zone. Route planning Automatic Automatically calculates a new route whenever you veer re-planning off the currently planned route.
Pocket PC when you are navigating. 5. The GPS Status In order to use TomTom Navigator for turn-by-turn navigation you need to have a working connection between your Pocket PC and your GPS receiver. The GPS Status view provides access to GPS receiver information and settings.
Tap and hold any of your contacts; you may choose to navigate to that contact (Navigate to...), or to show the address of the contact on the map (Show TomTom map...). The address of the selected contact must be on the currently selected map.
Page 17
Our address is Notice The information in this document is subject to change without notice. TomTom B.V. shall not be liable for technical or editorial errors or omissions contained herein; not for incidental or consequential damages resulting from the performance or use of this material. This document contains information protected by copyright.
Need help?
Do you have a question about the Navigator Navigator 2 and is the answer not in the manual?
Questions and answers