Connecting a speaker system to your 5.1 Fun sound card
You can connect any standard active speaker system to your Aureon 5.1 Fun sound card.
Make sure that the front port i with JP1 is configured as "Line".
The illustration below shows the typical connections for a 6-channel (5.1) speaker system (the
required double cinch to 3.5 mm jack connector cables are generally supplied with your
speaker system, such as TerraTec HomeArena products).
To connect a 4-channel speaker system please use only the front i and rear h port and for a
2 / 2.1 channel speaker system only the front i port of the sound card.
After installation of the drivers and the software select the correct speaker configuration in
the Aureon 5.1 Fun Control Panel (see "The Aureon 5.1 Fun Control Panel").
SoundSystem Aureon 5.1 fun (English)
9