TerraTec SINE HP 48 Manual
TerraTec SINE HP 48 Manual

TerraTec SINE HP 48 Manual

Stereo headphone amplifier

Advertisement

TERRATEC PRODUCER/SINE HP 48
English Manual
Version 1.0, last revised: November 2003

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SINE HP 48 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TerraTec SINE HP 48

  • Page 1 TERRATEC PRODUCER/SINE HP 48 English Manual Version 1.0, last revised: November 2003...
  • Page 2 CE Declaration TerraTec Electronic GmbH, Herrenpfad 38, D-41334 Nettetal, Germany hereby declare that the product: TerraTec Producer SINE HP 48, to which this declaration refers is in compliance with the following standards or standardizing documents: 1. EN 55013 2. EN 55020...
  • Page 3: Table Of Contents

    Welcome! ........................5 Scope of delivery......................5 Connections and controls .................... 6 The front panel: ......................6 The rear panel: ......................6 Function......................... 7 Technical data ....................... 9 Service at TerraTec Producer..................10 Internet, Hotline ......................10 SINE HP 48 (English)
  • Page 4: Important Safety Information

    Please ensure that all analog devices are turned off before plugging them in. This will protect you from any possible—albeit weak—electrical shocks, as well as protecting your speakers and your hearing from sudden peaks. For digital devices, be sure to at least lower the volume on your playback equipment. SINE HP 48 (English)
  • Page 5: Welcome

    Thanks for your attention—and here's to your creativity. Sincerely,Your TerraTec Producer Team Scope of delivery Start by making sure that the contents of the package are complete. The SINE HP 48 package should contain at least the following: 1 19" SINE HP 48 rack module...
  • Page 6: Connections And Controls

    5. INPUT 2: stereo input, 1/4" stereo jack 6. INPUT 1 LEFT (STEREO): left input in mono mode or stereo input for stereo signal, 1/4" stereo jack 7. INPUT 1 RIGHT (MONO): right input, 1/4" mono jack SINE HP 48 (English)
  • Page 7: Function

    Function To use the SINE HP 48 headphone amp, connect it to an AC power supply. Use the included 12 V AC adapter for this purpose. The LED on the front panel indicates that the device is operational (no on/off switch).
  • Page 8 If all four inputs are in use, all channels will be used independently. The input signals can also be split. For best results, use 600 ohm headphones. Using headphones with a lower impedance (e.g. 40 ohms) may result in distortion at high volumes. SINE HP 48 (English)
  • Page 9: Technical Data

    10 kohm Max. output power: 0.2 W ea. at 600 ohms Outputs: unbalanced Frequency response: 20 Hz – 20 kHz External power supply: 12 V AC, >500 mA Dimensions: 482.6 x 87 x 44 mm (19”, 1U) SINE HP 48 (English)
  • Page 10: Service At Terratec Producer

    If possible, try our Internet support system first: under http://www.terratec.com/ you will always find current answers to frequently asked questions (FAQ). If these options do not provide the necessary help, please contact our phone hotline. You can also reach us online.

Table of Contents