Related Manuals for TerraTec SINE PA 120
Summary of Contents for TerraTec SINE PA 120
- Page 1 TERRATEC PRODUCER/SINE PA 120, PA 200, PA 460 English Manual Version 1.0, last revised: November 2003...
- Page 2 CE Declaration TerraTec Electronic GmbH, Herrenpfad 38, D-41334 Nettetal, Germany hereby declare that the products: TerraTec Producer SINE PA 120, PA 200 and PA 460, to which this declaration refers are in compliance with the following standards or stan- dardizing documents: 1.
-
Page 3: Table Of Contents
SINE PA 460 ......................... 10 Connections and controls ..................10 The front panel:...................... 10 The rear panel:....................... 11 Function........................11 Technical data ......................12 Service at TerraTec Producer..................13 Internet, Hotline ......................13 SINE PA 120, PA 200, PA 460 (English) -
Page 4: Important Safety Information
For digital devices, be sure to at least lower the volume on your playback equipment. SINE PA 120, PA 200, PA 460 (English) -
Page 5: Welcome
Sincerely,Your TerraTec Producer Team Scope of delivery Start by making sure that the contents of the package are complete. The SINE PA 120 / PA 200 / PA 460 power amplifier package should contain at least the following: SINE PA 120 or SINE PA 200 or SINE PA 460 19" rack power amplifier... -
Page 6: Sine Pa 120
10. CINCH / 1/4" JACK: input selector, cinch or jack 11. INPUT 1/2: cinch input 12. INPUT 2: input 2 (right) 1/4" mono jack 13. INPUT 1 (1/2 BRIDGE): input 1 (left) 1/4" mono jack SINE PA 120, PA 200, PA 460 (English) -
Page 7: Function
Function The SINE PA 120 studio power amplifier is designed for installation in 19" racks. Please ensure that it gets adequate ventilation. Use the included power cable to connect the PA 120 to an AC power source. Connect both inputs to the outputs of your mixer and the outputs to your speakers (4-8 ohm). Turn both VOLUME controls completely down. -
Page 8: Sine Pa 200
9. OUTPUT RIGHT: right speaker connector 10. AC IN: AC power input 11. OUTPUT LEFT: left speaker connector 12. INPUT LEFT: left input, 1/4" mono jack 13. INPUT LEFT: left input, XLR SINE PA 120, PA 200, PA 460 (English) -
Page 9: Function
Harmonic distortion 0.01 % at 1 kHz, 5 W 0.1 % at 20 Hz – 20 kHz, 50 W Fuse 800 mA slow Dimensions 482.6 x 175 x 44 mm (19“, 1U) SINE PA 120, PA 200, PA 460 (English) -
Page 10: Sine Pa 460
8. STATUS: operation and mute LED 9. BRIDGE: switches channels 3/4 to mono mode 10. VOLUME CHANNEL 3: volume control for channel 3 11. VOLUME CHANNEL 4: volume control for channel 4 SINE PA 120, PA 200, PA 460 (English) -
Page 11: The Rear Panel
1 to 2 seconds. The power-up delay needs around 10 seconds to become active after turning the amplifier off briefly. After turning off the amplifier's power, wait at least 10 seconds before turning it back on to prevent damaging your speakers (power-on click). SINE PA 120, PA 200, PA 460 (English) -
Page 12: Technical Data
0.02 % at 0.1 kHz, 20 W, 8 ohms 0.01 % at 1 kHz, 20 W, 8 ohms 0.02 % at 1 kHz, 30 W, 4 ohms Fuse 800 mA slow Dimensions 482.6 x 175 x 44 mm (19“, 1U) SINE PA 120, PA 200, PA 460 (English) -
Page 13: Service At Terratec Producer
If possible, try our Internet support system first: under http://www.terratec.com/ you will always find current answers to frequently asked questions (FAQ). If these options do not provide the necessary help, please contact our phone hotline. You can also reach us online.
Need help?
Do you have a question about the SINE PA 120 and is the answer not in the manual?
Questions and answers