Ditto Looper In 30 Seconds; Operation; Technical Specifications - TC Electronic DITTO LOOPER User Manual

Ditto Looper in 30 seconds

If you are in a hurry, chances are you'll find what you're looking
for on this page.

Operation

Power up Ditto Looper Connect a power supply.
Record Tap footswitch once.
Switch to playback Tap footswitch again.
Undo/Redo last recording Press and hold footswitch.
Stop Double-tap footswitch.
Stop and delete the loop Double-tap and hold footswitch.
Resume playback Tap footswitch again.
Delete the loop Press and hold footswitch
(when Ditto Looper is disengaged).
Ditto Looper in 30 seconds

Technical Specifications

Maximum loop length
Maximum no. of overdubs
Bypass mode
Latency
Dimensions
(Width x Depth x Height)
Input Connector Type
Output Connector Type
Power Input
USB Connector Type
Controls
5 minutes
Unlimited
True Bypass
None (analog dry-through)
48 x 48 x 93 mm /
1.9 x 1.9 x 3.7"
Standard ¼" jack – mono/TS
Standard ¼" jack – mono/TS
Standard 9 V DC,
centre negative (not supplied)
Mini-B USB
Loop Level knob
(Loop playback volume)
Switch
(Loop playback control)
5