Download
Share
Print this page
TC Electronic BH250 User Manual
  1. Manuals
  2. Brands
  3. TC Electronic Manuals
  4. Amplifier
  5. BH250
  6. User manual

TC Electronic BH250 User Manual

Class d bass amplifier
Hide thumbs Also See for BH250:

Advertisement

Quick Links

See also: Manual
BH250
User's manUal

Advertisement

loading

Related Manuals for TC Electronic BH250

Summary of Contents for TC Electronic BH250

  • Page 1 BH250 User’s manUal...

  • Page 3: Important Safety Instructions

    Important Safety InStructIonS Warning! 1 Read these instructions. • To reduce the risk of fire or electrical shock, do not expose this equipment to 2 Keep these instructions. dripping or splashing and ensure that no objects filled with liquids, such as vases, 3 Heed all warnings. 4 Follow all instructions. are placed on the equipment. • This apparatus must be earthed.

  • Page 4: Emc/Emi

    emc/emI This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 5: Table Of Contents

    table of contentS Important Safety Instructions........a EMC/EMI ..............b Table Of Contents ............3 Introduction ..............4 Quick Setup Guide ............. 5 Operation – Front Panel ..........6 Operation – Rear Panel ..........8 Appendix – Protections Modes ........ 10 Appendix –...

  • Page 6: Introduction

    What is it? BH250 is born with a Chorus effect under the hood, and with the TonePrint knob you can add just the amount your want. But Chorus is just the default effect! From TC Electronic’s website you can download and try out a Flanger, Vibrato, Drive or Compressor. Of course, all effects are specially tuned for bass.

  • Page 7: Quick Setup Guide

    Setting up • Connect a cabinet or combination of cabinets with a minimum impedance of 4 Ohms. • Connect the power cable to an outlet with correct voltage. This amplifier accepts from 100 to 240 VAC. • Connect your bass to the input jack on the front panel. • Select Active or Passive pickup type using the GAIN selector. • Adjust the output volume using the MASTER knob. • Play! Be sure to check www.tcelectronic.com for latest news about BH250 and other TC products.

  • Page 8: Operation - Front Panel

    You can connect an active or passive bass to this ¼” input The BH250 Bass, Middle and Treble controls are not your jack. The BH250 input stage is designed to adapt to any type of standard Bass amp EQ. Standard tone controls boost or cut the pickup.
  • Page 9 – front panel TonePrint 8/10 – THE TUNER The BH250 tuner allows you to easily tune a 4, 5 or 6 string bass. TonePrints for your bass amp. What is it? E, A, D and G LEDs (8) indicate which of the four standard BH250 is born with a Chorus effect under the hood and with strings you are tuning.

  • Page 10: Operation - Rear Panel

    MAINS IN – Power Input & POWER Switch PEDAL input The switch-mode power supply accepts voltage from 100V to Connect a TC Electronic SWITCH 3 (optional) and activate/ 240V deactivate TonePrint and Tuner mute. The ground pin of the power supply unit must be...
  • Page 11 – rear panel BALANCED OUT Connection for computer for TonePrint upload and software Use the BALANCED OUT XLR to connect the BH250 to the PA updates. when you play on stage, or to connect your amp to a recording device when you are in the studio.

  • Page 12: Appendix - Protections Modes

    If these steps doesn’t solve the problem and the Tuners LED’s The BH250 is equipped with an intelligent protection system, continue to flash, you will have to send the BH250 to a qualified ensuring that the amp does not suffer or malfunction if operated service center for inspection.

  • Page 13: Appendix - Technical Specifications

    appendIx – technIcal SpecIfIcatIonS Input Bal. Out Optimal Load Impedance 600 Ohm Input connector 1/4” jack Rehearsal input 1/8” jack input, fits to iPod ® Input impedance 500 kOhm / 100pF Humidity Max. 90 % non-condensing Gain range -96 to 36dB Dimensions 220 x 63 x 231 mm / 8.7”...