Reformatting The Fat Partition; Viewing The Capacity Of The Mtr Partition - Tascam Digital Portastudio DP-03 Owner's Manual

3 Turn the DATA wheel to select
Press the F4 (¥) button to open the
screen.
A list of the MTR partitions and their sizes (not open
capacities) appear.
A * marks the active partition.
4 Turn the DATA wheel to select the partition that
you want to reformat and press the F2 (
button.
A pop-up message warning that all data on the
partition will be erased appears.
5 Press the F3 ( ) button to reformat the partition.
YES
When reformatting finishes the
•
After reformatting, one song is automatically created in
•
the MTR partition.
To cancel reformatting, press the
•

Reformatting the FAT partition

You can also reformat just the FAT partition. The size of the
FAT partition cannot be changed.
CAUTION
You cannot undo this operation! All data on the FAT
partition will be erased, so be certain that you will not lose
anything important when reformatting.
1 When the recorder is stopped, press the MENU
button to open the
MENU
2 Turn the DATA wheel to select
F4 (¥) button to open the
.
REFORMAT
REFORMAT
)
EXEC
menu reopens.
CARD
F4 ( ) button.
NO
screen.
, and press the
CARD
menu screen.
CARD
11 – SD Card Management
3 Turn the DATA wheel to select
and press the F4 (¥) button.
A pop-up message warning that all data on the FAT
partition will be erased appears.
4 Press the F3 ( ) button to reformat the FAT
YES
partition.
When reformatting finishes the
•
reopens.
To cancel reformatting, press the
•
Viewing the capacity of the MTR
partition
Follow these procedures to view the capacity of the MTR
partition.
1 When the recorder is stopped, press the MENU
button to open the
MENU
2 Use the DATA wheel to select
F4 (¥) button to open the CARD screen.
Use the DATA wheel to select
press the F4 (¥) button to open the
screen, where you can view the capacity of the MTR
partition.
,
FAT REFORMAT
menu screen
CARD
F4 ( ) button.
NO
screen.
, and press the
CARD
, and
PARTITION
PARTITION
63
TASCAM DP-03